NOYAFA
Noyafa Network Cable Tester Wire Tracer Kit with Anti-jamming Porbe, Continuity Crimp Length PoE Port Blink Test NF-8209S
Noyafa Network Cable Tester Wire Tracer Kit with Anti-jamming Porbe, Continuity Crimp Length PoE Port Blink Test NF-8209S
Couldn't load pickup availability
Fast, Free Shipping
Features
Locate The Target Cable Quickly - Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments.
Ethernet Continuity Test - Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly.
Measure Cable Length Accurately - Measure the network cable in the range of 2.5m-500m.
Port Blink Test - Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch.
PoE Testing - Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard)
Work Safely - Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience.
Rechargeable Battery- The network tester can be recharged using a USB-C cable, and the lithium battery provides long-lasting power
Other Function - Quality control of the crimping crystal
What's in the box - Emitter *1, Receiver *1, RJ45 interface network cable *1,?RJ11 interface?telephone line *1, RJ45 alligator clip *1, USB-C charging cable *1, Headphone *1, User manual *1
Quick Details
Quick Details
Model: NF-8209S
Wiremap:Yes
Test Range: Max range 600m)
Crimping: Identify response speed ≤ 1second
Test Type: 8 cores
Length: Yes(test range from 2 to 500m)
Accuracy: ±1.6m
Breakage location: Yes
Scan: Yes
Dual mode to scan cable: AC filter & Non AC filter
Max. signal voltage: 5V+/-1.0V p-p(audio file)
Frequency: 455KHz
Max range: 600m (RJ45)/ 400m(RJ11)
POE: Yes
Test range: DC 5~60V standard / non-standard PoE switch
Power supply core/Jumper method: End jumper/middle jumper/8-pin power supply/unknown
PSE type: IEEE 802.3af/at,Non-standard
Port flash /Link test: Yes
Full-duplex/half-duplex recognition: Yes
Auti-negotiation/Non-anto-negotiation: Yes
Switch type: 10M/100M/1000M
Auto-off time: Yes
Sentivity adjustable: Yes
Lamp: Yes
LCD display: 128*64 Dot-matrix with backlight
Power supply: 3.7v 1400mAh lithium battery
Voltage protection: DC48V 5mA
Max working current: <150mA
NCV: AC 70V~1000V 50/60Hz
Battary type: 3.7v 1400mAh lithium battery
Max working current<280mA
Other functions: Low pressure tips3.5v+/-0.1v
Low power automatic shutdown150min/30min/60min/OFF
Charging method: DC 5V 1A Type-C
Operating temperature/humidity32~122°F (0~50°C)/90% non-condensing
Storage temperature14~122°F (-10~50°C)
Size125mm*70mm*32mm
Q&A
Q&A














A really handy Test tool, very useful in establishing and troubleshooting LAN. It's build on a user friendly menu with a long lasting battery.
I received and review it recently, the scan feature improved a lot. Excellent Job NOYAFA.
I have reviewed all of the defined functions and can confirm that they are all functioning properly.
it is very good products and complete sets in the bag ,
everything is working properly.
thank you Noyafa.
Hello
I received the order.
The products are ok.