Find an underground cable

Quickly Find And Trace An Underground Cable, Wire, Or Pipeline With Noyafa NF-826

Noyafa NF-826 professional underground wire locator

Noyafa NF-826
$128.99
---------------------------
A professional underground cable locator to detect the specific location and fault of wires, cables, pipes buried at max. 98 inch (2.5m) depth.
---
✔️ LCD display
✔️ Sensitivity adjust
✔️ Voltage detecting
✔️ Probe length adjust
❌ Circuit breaker locate
❌ Socket test
---------------------------
🛒 Buy It Now
Extra $8.99 Off Code:
QHKKXXMCS5AH
Noyafa NF-825TMR
$107.89
---------------------------
Noyafa’s new arrival electric wire detector tracer with circuit breaker finding, and the detection depth range is 0 - 20 inches (0.5 meter).
---
❌ LCD display
✔️ Sensitivity adjust
✔️ Voltage detecting
✔️ Probe length adjust
✔️ Circuit breaker locate
✔️ Socket test
---------------------------
🛒 Buy It Now
Extra $8 Off Code:
4XQ2WMSJB9K4
Noyafa NF-820
$72.58
---------------------------
An anti-jamming invisible cable detector for underground, inside-wall cables & pipes locating with up to 79 inch (2.0 meter) detection depth.
---
❌ LCD display
✔️ Sensitivity adjust
✔️ Voltage detecting
✔️ Probe length adjust
❌ Circuit breaker locate
❌ Socket test
---------------------------
🛒 Buy It Now
Noyafa NF-816L
$55.71
---------------------------
An underground low voltage wire and cable locator and the detection depth range is 0 - 23.62 inches (0 - 0.6 meter).
---
❌ LCD display
✔️ Sensitivity adjust
✔️ Voltage detecting
✔️ Probe length adjust
✔️ Circuit breaker locate
✔️ Socket test
---------------------------
🛒 Buy It Now

Quickly find a buried cable in 3 steps using Noyafa NF-826

Connect to the target cable. Ground the transmitter. Start searching.

Step 1. Connect the positive pole of the transmitter to the target cable and ground the transmitter via the negative terminal of the transmitter.

Step 2. Set the signal level to be sent according to the depth of the cable buried. After setting, start sending high frequency signal.

Step 3. Find or track the cable by observing the received signal strength of the receiver. The stronger the signal, the closer to the receiver. For breakpoints or shortpoints the signal will get very weak.